BS420A0 · Drawing-led manufacturing

BS420A0 Coffee Machine Thick Film Heater

A round heater plate and spiral-channel mating part for coffee-machine thermal assemblies. The supplied drawing separates 650 W and 1100 W plate variants from their 1300 W and 2200 W paired references.

2 variants
650 W / 1100 W plate labels
220 V
Drawing voltage
1300 / 2200 W
Paired drawing references
Spiral channel
Actual supplied geometry
Product Categories

Verified capability review

Drawing reference and quotation inputs

The following values come from the supplied model drawing.

Reference drawing values do not replace an approved order revision or batch test record.

ParameterProduct reference
Product routeCoffee-machine thick film heating plate
Variant labelsBS420A0-650W; BS420A0-1100W
Plate / paired power650 / 1100 W per plate; 1300 / 2200 W paired
Voltage220 V drawing reference
Dielectric test requirementAC 1500 V for 3 s; leakage <5 mA
Insulation requirement≥500 MΩ at DC 500 V
Drawing, measurement and acceptance details
Product route
Coffee-machine thick film heating plate. The supplied drawing identifies a customer-supplied base; base sourcing and processing scope must be agreed. Drawing requirement; final release follows the ordered revision and inspection plan.
Variant labels
BS420A0-650W; BS420A0-1100W. Select the upper/lower plate and its matching revision explicitly. Drawing requirement; final release follows the ordered revision and inspection plan.
Plate / paired power
650 / 1100 W per plate; 1300 / 2200 W paired. These are separate rows and assembly references in the drawing, not interchangeable single-plate ratings. Drawing requirement; final release follows the ordered revision and inspection plan.
Voltage
220 V drawing reference. The released assembly configuration and control requirements remain controlling. Drawing requirement; final release follows the ordered revision and inspection plan.
Dielectric test requirement
AC 1500 V for 3 s; leakage <5 mA. The drawing requires no breakdown or flashover. No batch test result is asserted here. Drawing requirement; final release follows the ordered revision and inspection plan.
Insulation requirement
≥500 MΩ at DC 500 V. Agree the actual test setup, sampling and recorded result on the order. Drawing requirement; final release follows the ordered revision and inspection plan.
Thermal uniformity target
≤±5°C drawing target. Measurement locations, loading, fixture and control conditions require agreement; this is not a supplied test report. Drawing requirement; final release follows the ordered revision and inspection plan.
Channel / sealing interface
By selected assembly drawing. Provide flow, sealing, pressure and mating-interface requirements for application review. Drawing requirement; final release follows the ordered revision and inspection plan.

BS420A0 engineering and inspection review

Resolve these model-specific interfaces before confirming a sample or production order.

Choose the complete plate pair

The drawing separates upper and lower plates, two per-plate variants and paired power references.

Channel and sealing interface

Review the real spiral channel, center opening, mating surfaces and connection geometry with the complete assembly.

Electrical insulation

Agree the specified dielectric and insulation-resistance checks with the ordered heater stack.

Thermal control and inspection

Define temperature sensing, uniformity measurement, operating duty and acceptance evidence before release.

Assembly contexts to review

These are engineering review contexts, not customer project claims or application approvals.

View application guides

Supplied product and drawing evidence

The artwork extract below comes from the supplied model drawing.

The CAD view is a partial artwork extract for reference. It is not the complete manufacturing drawing or a dimensional inspection record; the approved order drawing controls every mechanical feature.

BS420A0 source CAD geometry crop
Source CAD geometry
BS420A0: Crop of the actual heater contact pads and lower fittings
Actual product detail
Reference basis
Values on this page are transcribed from the supplied BS420A0 drawing and scoped to its selected variant.
Photographic treatment
Source geometry is preserved. Selected bare stainless surfaces are cosmetically color-corrected to bright silver; photo crops are not new product angles.
View 2 additional evidence boundaries
Inspection evidence
Drawing acceptance requirements and thermal targets are not presented as completed batch tests. Request the agreed inspection records with your order.
Unconfirmed conditions
Material-stack details, assembly interfaces, operating duty and validation conditions not fixed in the selected drawing remain subject to application review.

Manufacturing and inspection capability

Screen printing and electrical inspection are supported by general company workshop photographs. They illustrate company capability and are not BS420A0 production-lot or test records.

Review manufacturing capabilities
Company screen-printing workstation
Screen-printing workstation
Company electrical inspection bench
Electrical inspection bench

Company quality document

Original company ISO 9001 certificate preview
Company document

ISO 9001 certificate

Company-level document only. Its holder, printed scope, dates and surveillance conditions govern applicability; it is not a test report for this model.

View certificate

Technical FAQ

Short answers for quotation planning; released drawings and validation requirements remain controlling.

How do the plate and paired power references relate?

The drawing names 650 W and 1100 W plate variants and separately lists 1300 W and 2200 W upper-plus-lower assembly references. A quotation must identify the exact plates and assembly revision.

Is the channel part shown an illustration?

It comes from the supplied product photographs and original rotation video. Bare-metal color has been corrected in selected still photos; the original video preserves the supplied appearance and geometry.

Are the insulation figures batch results?

They are requirements in the supplied drawing: AC 1500 V for 3 seconds with leakage below 5 mA, and at least 500 MΩ at DC 500 V. No model batch test report was supplied.

What should the RFQ include?

Send the upper/lower plate drawings and variant, base-supply scope, assembly power, flow and sealing conditions, control plan, quantity and required tests.

Request a BS420A0 quotation

Send the current part and assembly drawings with the selected variant, quantity and operating requirements. We will review the drawing-controlled interfaces and required evidence before confirming the quotation.

RFQ inputs and review sequence
  • Model and revision stay attached to the inquiry.
  • Acceptance requirements are agreed before sample release.
  • Current BS420A0 part drawing, variant and assembly drawing.
  • Material stack, contact or terminal requirements and mating interface.
  • Electrical and thermal targets, control method and operating environment.
  • Prototype and production quantities, schedule, required tests and packing.
  1. 1Send the drawing and assembly requirements.
  2. 2Resolve dimensions, interfaces, loading and inspection scope.
  3. 3Confirm the quotation and sample acceptance plan.

Submit RFQ and upload files

PDF, DWG, DXF, STEP, Gerber, ZIP, Excel, Word, or sample photos are accepted.

The drawing-upload form loads as you reach this section.